How To Find Hard Disk Revolutions Per Minute (RPM) Speed From A Shell Prompt

Q. How do I find out my SCSI hard disk RPM speed from a Linux shell prompt without opening my server case? How do I find out hard disk model and serial number from a shell prompt?

A. A typical desktop hard disk rotate at 7,200 revolutions per minute (RPM). A typical server hard disk spin at 10,000 or 15,000 rpm to achieve sequential media transfer speeds. You can use hard disk model number to obtain disk RPM. For example, a typical Seagat disk Model # ST373455SS can provide following information:

  • ST – Brand identity
  • 3 – Form Factor (3 = 3.5″)
  • 73 – Disk size / Capacity in GB i.e. 73GB
  • 4 – Reserved for future use
  • 5 – RPM ( 5 = 15k and 0 = 10K)
  • 5 – Generation
  • SS – Indicates interface i.e Serial Attached SCSI

How do I find out hard disk model and serial number?

Use any one of the following command from shell prompt to find out hard disk model number:
$ cat /proc/scsi/scsi
OR use scsi_id command to querys a SCSI device via the SCSI INQUIRY vital product data (VPD) page 0x80 or 0x83 and uses the resulting data to generate a value that is unique across all SCSI devices that properly support page 0x80 or page 0x83.
$ /sbin/scsi_id -g -p 0x80 -s /block/sdd
$ sudo grep -i sdd /var/log/boot.log
OR use sginfo / scsiinfo command from sg3_utiles package, enter:
# sginfo -a /dev/sdd | more

scsiinfo or sg3_utils package

sg3_utils is a collection of Linux utilities for devices that use the SCSI command set. You can install by typing following command:
# yum install sg3_utils
If you are using Debian / Ubuntu Linux, enter:
$ sudo apt-get install sg3-utils

WARNING! Some of these tools access the internals of your hard disk system and the incorrect usage of them may render your system inoperable or loss of data possible.

Now you can use command sginfo with the -g switch to obtain information about hard disk cylinders, heads and RPM:
# sginfo -g /dev/sdd
Sample output:

Rigid Disk Geometry mode page (0x4)
Number of cylinders                74340
Number of heads                    2
Starting cyl. write precomp        0
Starting cyl. reduced current      0
Device step rate                   0
Landing Zone Cylinder              0
RPL                                0
Rotational Offset                  0
Rotational Rate                    15015

Finding out your hard disk RPM speed using manufactures website / product page

Once obtained hard disk model number, directly go to manufactures website and search for model to get detailed information.

Further readings:

Posted by: SXI ADMIN

The author is the creator of SXI LLC and a seasoned sysadmin, DevOps engineer, and a trainer for the Linux operating system/Unix shell scripting. Get the latest tutorials on SysAdmin, Linux/Unix and open source topics via RSS/XML feed or weekly email newsletter.

Leave a Reply

Your email address will not be published. Required fields are marked *

Previous Post

How to Make Website WCAG Compliant?

Next Post

Link download Kali Linux 2020.1 (ISO + Torrent)

Related Posts