How to install and setup LXD on Fedora Linux server

I set up a brand new Fedora Linux server in the cloud. How can I install and setup LXD on Fedora Linux? How do I create my first VM using LXD?

Linux container is an implementation of operating system-level virtualization for the Linux operating system. LXD is a system container manager. You get an experience similar to virtual machines but using Linux containers instead. You can run various Linux distros using LXD. This page shows how to set up, use LXD and create your first VM on Fedora Linux server. Finally, you will then learn how to route traffic to the container from the Internet.

Requirements to run LXD on Fedora Linux

  1. Fedora Linux server either running on bare metal or in the cloud. I tested with Fedora Linux version 28.
  2. Snapd installed and configured on Fedora

Let us see all steps to install and setup LXD on Fedora Linux server in details.

Step 1 – Install snapd

To install the snapd package type the following dnf command:
sudo dnf install snapd

How to install snapd on Fedora Linux

You mist setup a symlink using the ln command, enter:
sudo ln -s /var/lib/snapd/snap /snap

Step 2 – Install and setup LXD on Fedora Linux server

Type the following snap command:
sudo snap install lxd

Verify LXD installation

Make sure lxd service enabled on the Fedora Linux:
$ sudo snap enable lxd
$ sudo snap services lxd

Service     Startup  Current
lxd.daemon  enabled  active

Add a Linux user named ‘vivek’ to lxd group

Type the following usermod command (feel free to replace the username ‘vivek‘ with your actual username on Fedora Linux):
sudo usermod -a -G lxd vivek
id vivek
newgrp lxd

Step 3 – Configure the LXD networking and storage for VM

Type the following command:
lxd init

I suggest you use new backends such as ZFS, BTRFS, or LVM and along with DHCP based IP networking for ease of setup for each VM. As a result, you can use snapshots and other advanced features supported by new backends.

lxd verification

Make sure the lxc client is talking to the LXD daemon:
lxc list

List all available Linux LXD (Linux Containers) VM images

lxc image list images:

(click to enlarge)

Most of the images are known by several aliases. To see a list, enter:
lxc image alias list images:
lxc image alias list images: | grep -i arch
lxc image alias list images: | grep -i debian
lxc image alias list images: | grep -i fedora

Step 4. Create your first LXD VM on Fedora

It is time to create and use your first container. To create and start containers from images use the launch command:
lxc launch images:{distro}/{version}/{arch} {container-name-here}
Let us see some examples to create and start containers from various Linux distro images as per your needs.

CentOS Linux 7 vm

lxc launch images:centos/7/amd64 cenots-7-vm

Fedora Linux 27 vm

lxc launch images:fedora/27/amd64 fedora-27-vm

OpenSUSE Linux 42.3 vm

lxc launch images:opensuse/42.3/amd64 opensuse-42-3

Gentoo Linux vm

lxc launch images:gentoo/amd64 gentoo-linux-vm

Arch Linux vm

lxc launch images:archlinux/amd64 arch-linux-vm

Ubuntu Linux LTS 18.04 VM

lxc launch images:ubuntu/18.10/amd64 ubuntu-nginx-vm

Debian Linux 9.x VM

lxc launch images:debian/9/amd64 debian-nfs-server-vm

How to list all my containers/VMs

List the existing containers:
lxc list --fast
lxc list | grep RUNNING
lxc list | grep STOPPED

How to execute/run the specified command in a container VM

lxc exec containerName -- command
lxc exec containerName -- /path/to/script
lxc exec containerName --env EDITOR=/usr/bin/vim -- command
### run date, ip a, ip rm and other commands on various containers ###
lxc exec cenots-7-vm -- date
lxc exec ubuntu-nginx-vm -- ip r
lxc exec fedora-27-vm -- dnf update
lxc exec debian-nfs-server-vm -- cat /etc/debian_version

How to login to my containers/VMs

To gain login and gain shell access in a container named debian-nfs-server-vm , enter:
lxc exec debian-nfs-server-vm bash
Now you can run commands or install packages for the VM:
# cat /etc/*issue*
# apt-get update
# apt-get upgrade
# apt-get install nginx

To exit simply from container simply type exit:
# exit
Sample session:

How to start/stop/restart my containers

lxc start containerName # <--- start it
lxc stop containerName # <--- stop it
lxc restart containerName # <--- restart it
lxc stop ubuntu-nginx-vm
lxc start ubuntu-nginx-vm
lxc restart ubuntu-nginx-vm

How to delete my containers

lxc stop vmName && lxc delete vmName
lxc stop ubuntu-nginx-vm && lxc delete ubuntu-nginx-vm

Get info about running containers

lxc info
lxc info containerName
lxc info ubuntu-nginx-vm

Step 5 – Forward incoming connections to the Linux container VM

First install the nginx server inside ubuntu-nginx-vm:
lxc exec ubuntu-nginx-vm bash
apt update && apt upgrade && apt install nginx
systemctl enable nginx
systemctl status nginx
### update/create the default html file
cat /var/www/html/index.nginx-debian.html

Sample file:

<!DOCTYPE html>
 <title>Welcome to nginx running on LXD VM!</title>
 <h1><h1>Welcome to nginx running on LXD VM!</h1>

<!DOCTYPE html>
<title>Welcome to nginx running on LXD VM!</title>
<h1><h1>Welcome to nginx running on LXD VM!</h1>

Finally logout from the LXD vm:
# logout
Find ubuntu-nginx-vm IP address:
lxc list ubuntu-nginx-vm
Sample outputs:

|      NAME       |  STATE  |        IPV4         | IPV6 |    TYPE    | SNAPSHOTS |
| ubuntu-nginx-vm | RUNNING | (eth0) |      | PERSISTENT | 0         |

| ubuntu-nginx-vm | RUNNING | (eth0) | | PERSISTENT | 0 |

You need to redirect/forward all incoming traffic on port 80 to Fedora Linux 28 public IP address say to LXD private IP address

Find the default firewalld zone

sudo firewall-cmd --get-default-zone

Open port 80 for FedoraServer zone

sudo firewall-cmd --zone=FedoraServer --add-service=http --permanent

Forward port 80 to the LXD server port 80

sudo firewall-cmd --permanent --zone=FedoraServer --add-forward-port=port=80:proto=tcp:toport=80:toaddr=

Reload the fireall

sudo firewall-cmd --reload

Test it

Fire the web browser and type url:

For more info see FirewallD docs here and LXD info here.


You just set up an LXD container running on Fedora Linux. Once the container is up and running, you could install additional services such as Nginx, MariaDB, PHP, Python and more.

This entry is 11 of 14 in the LXD Tutorial series. Keep reading the rest of the series:

  1. How to install LXD container hypervisor on Ubuntu 16.04 LTS
  2. How to install and setup LXC (Linux Container) on Fedora Linux 26
  3. How to install LXD container under KVM or Xen virtual machine
  4. How to list VM images in LXD (Linux Containers)
  5. How to upgrade LXD VMs powered by Ubuntu/Debian or CentOS Linux
  6. How to auto start LXD containers at boot time in Linux
  7. How to rename LXD / LXC container
  8. How to run commands on Linux Container (LXD) instance at provision launch time
  9. How to use LXD (Linux containers) in a shell script to create VM when the cloud instance launches
  10. How to move/migrate LXD VM to another host on Linux
  11. How to install and setup LXD on Fedora Linux server
  12. How to install and setup LXD on CentOS Linux 7.x server
  13. Install LXD pure-container hypervisor on Ubuntu 18.04 LTS
  14. Create snapshots with lxc command for LXD

Posted by: SXI ADMIN

The author is the creator of SXI LLC and a seasoned sysadmin, DevOps engineer, and a trainer for the Linux operating system/Unix shell scripting. Get the latest tutorials on SysAdmin, Linux/Unix and open source topics via RSS/XML feed or weekly email newsletter.