How to secure MongoDB on Linux or Unix production server

MongoDB ransom attacks are in Wild. I am using it for storing data on my public facing cloud server powered by Ubuntu Linux. How do I protect and secure my MongoDB nosql server on Linux or Unix operating system?

MongoDB is a free and open-source NoSQL document database server. It is used by web application for storing data on a public facing server. Securing MongoDB is critical. Crackers and hackers are accessing insecure MongoDB for stealing data and deleting data from unpatched or badly-configured databases. In this tutorial you will learn about how to secure a MongoDB instance or server running cloud server.

MongoDB config

  1. The default file is located at /etc/mongodb.conf
  2. The default port is TCP 27017
  3. MongoDB server version: 3.4.1

Limit network exposure

Edit the /etc/mongodb.conf or /usr/local/etc/mongodb.conf file, enter:
$ sudo vi /etc/mongodb.conf
If your web-app and MongoDB (mongod server) installed on the same machine, set the IP address of MongoDB to This cuts communication directly from the internets:

# network interfaces
  port: 27017

However, it is possible that you have two or more servers as follows:

Fig.01: A sample modern web-app with MonoDB running inside your VLAN

You need to bind mongod to so that it can be only accessed over VLAN:


The bind_ip directive Ensure that MongoDB runs in a trusted network environment and limit the interfaces on which MongoDB instances listen for incoming connections.

Change the default port

You can also change the default port if you want. In this example set it to 2727:

port: 2727

Save and close the file. You need to restart MongoDB, enter:
$ sudo systemctl restart mongod
OR if you are using FreeBSD Unix:
# service mongod restart
Verify open ports with netstat command:
$ netstat -tulpn
$ ss -tulpn
$ sockstat #freebsd unix command
$ ss -tulpn | grep 27017
$ netstat -tulpn | grep 27017

Sample outputs:

tcp        0      0*               LISTEN      6818/mongod

Setup access control

You need to add a user administrator to a MongoDB instance running without access control and then enables access control. By default anyone can connect to the MongoDB and this is not a good idea. For example:

Animated gif 01: Connect a mongo shell to the instance with any sort of authentication

Connect to the DB instance

$ mongo
## or ##
$ mongo --port 2727
MongoDB shell version: 2.6.10
connecting to: test

Create the user administrator

Warning: Create user with strong password. For demo purpose I am using ‘mySuperSecretePasswordHere’ but you should use strong password.

You need to use admin database. Type the following command at > prompt to create your superuser:
> use admin
switched to db admin

Next creates the user vivek in the admin database with the userAdminAnyDatabase role:
> db.createUser({user:"vivek",pwd:"mySuperSecretePasswordHere", roles:[{role:"userAdminAnyDatabase",db:"admin"}]})
Sample outputs:

Successfully added user: {
	"user" : "vivek",
	"roles" : [
			"role" : "userAdminAnyDatabase",
			"db" : "admin"

Disconnect the mongo shell by typing the following command:
> exit

Re-start the MongoDB instance

Edit the /etc/mongodb.conf or /usr/local/etc/mongodb.conf file, enter:
$ sudo vi /etc/mongodb.conf
Turn on security:

  authorization: enabled

Save and close the file. Re-start the MongoDB instance:
$ sudo systemctl restart mongodb
OR if you are using FreeBSD Unix:
# service mongod restart
To authenticate during connection using user vivek and password for the admin database:
$ mongo -u vivek -p mySuperSecretePasswordHere --authenticationDatabase admin
Add additional user to your DB. First create a new database called “nixcraft”:
> use nixcraft
switched to db nixcraft

Create a user named ‘nixdbuser’ with a password named ‘myKoolPassowrd’ for nixcraft db:

       USER: "nixdbuser",
       pwd: "myKoolPassowrd",
       roles: [ { ROLE: "readWrite", db: "nixcraft" },
                { ROLE: "read", db: "reporting" } ]

Sample outputs:

Successfully added user: {
	"user" : "nixdbuser",
	"roles" : [
			"role" : "readWrite",
			"db" : "nixcraft"
			"role" : "read",
			"db" : "reporting"

You can now connect to nixcraft db as follows:
$ mongo --port 27017 -u "nixdbuser" -p "myKoolPassowrd" --authenticationDatabase "nixcraft"
This make sure only authorized admin user named ‘vivek’ can execute commands or nixdbuser can do read/write operation on nixcraft db. You can verify it as follows by inserting records:
> use nixcraft
> db
> db.names.insert({"title":"Mr", "last":"Gite", "First":"Vivek"})
> db.names.find()
> show dbs

Sample outputs:

Fig.02: Enabled access control and enforce authentication

Use firewall

Use firewalls to restrict which other entities are allowed to connect to your mongodb server. In this example only allow your application servers access to the database using ufw on Ubuntu or Debian Linux:
$ sudo ufw allow proto tcp from to port 27017
$ sudo ufw allow proto tcp from to port 27017

Enable SSL

Use SSL between your MongoDB client and server when connecting to your Mongodb server over the internet. Otherwise your session is open for the “man in the middle” attack. My setup is as follows:

  Common Name (e.g. server FQDN or YOUR name) []:
  The PEM pass phrase for server: mongodb_server_test_ssl
  The password/passphrase for client: mongodb_client_test_ssl

Type the following command the server certificate

$ sudo mkdir /etc/ssl/mongodb/
$ cd /etc/ssl/mongodb/
$ sudo openssl req -new -x509 -days 365 -out mongodb-server-cert.crt -keyout mongodb-server-cert.key

Sample outputs:

Fig.03: MongoDB SSL setup server certificate

Create the server .pem file with both key and certificate:
$ cd /etc/ssl/mongodb/
$ sudo bash -c 'cat mongodb-server-cert.key mongodb-server-cert.crt > mongodb-server.pem'

Type the following command the client certificate

$ cd /etc/ssl/mongodb/
$ sudo openssl req -new -x509 -days 365 -out mongodb-client-cert.crt -keyout mongodb-client-cert.key

Sample outputs:

Fig.04: MongoDB SSL setup client certificate

Create the client .pem file with both key and certificate:
$ cd /etc/ssl/mongodb/
$ sudo bash -c 'cat mongodb-client-cert.key mongodb-client-cert.crt > mongodb-client.pem'

Configure mongod and mongos for TLS/SSL server

Edit the /etc/mongodb.conf or /usr/local/etc/mongodb.conf file, enter:
$ sudo vi /etc/mongodb.conf
Update the config file as follows:

# network interfaces
  port: 27017
     mode: requireSSL
     PEMKeyFile: /etc/ssl/mongodb/mongodb-server.pem
     CAFile: /etc/ssl/mongodb/mongodb-client.pem
     PEMKeyPassword: mongodb_server_test_ssl

Save and close the file. Re-start the MongoDB instance:
$ sudo systemctl restart mongodb
OR if you are using FreeBSD Unix:
# service mongod restart

TLS/SSL Configuration for MongoDB clients

The syntax is as follows for mongo shell interface:
$ mongo --ssl --sslCAFile /etc/ssl/mongodb/mongodb-server.pem
--sslPEMKeyFile /etc/ssl/mongodb/mongodb-client.pem
--sslPEMKeyPassword mongodb_client_test_ssl
--host --port 27017
--u "nixdbuser" -p "myKoolPassowrd" --authenticationDatabase "nixcraft"

Sample outputs:

Fig.05: MongoDB SSL client connection using SSL certificate

And here is a Python client for connection to SSL enabled MongoDB:

client = pymongo.MongoClient('', ssl=True)


client = pymongo.MongoClient('',

Patch and run updated version of your OS and MongoDB

Applying security patches is an important part of maintaining Linux or Unix server. Linux provides all necessary tools to keep your system updated, and also allows for easy upgrades between versions. See “20 Linux Server Hardening Security Tips” for more information.

Further readings

Posted by: SXI ADMIN

The author is the creator of nixCraft and a seasoned sysadmin, DevOps engineer, and a trainer for the Linux operating system/Unix shell scripting. Get the latest tutorials on SysAdmin, Linux/Unix and open source topics via RSS/XML feed or weekly email newsletter.


How to KVM, QEMU start or stop virtual machine from command line (CLI)

KVM or Kernel Based Virtual Machine is a popular virtualization technology. It allows you to run virtual guest machines over a host machine. To start...

How to Docker backup Saving and restoring your volumes

Running a Docker volume backup First, we spin up a temporary container, and we mount the backup folder and the target Docker volume to this container....

How to Start and Enable Firewalld on CentOS 7

In this article, we discuss how to start and enable firewalld. It is highly recommended that you have a firewall protecting your server.Pre-Flight CheckThese...