I have Red Hat Enterprise Linux 6.x/7.x server. How do I find out and groups network bandwidth usage by process under Linux operating systems? How do I know what programs are using network bandwidth under Linux operating systems? How can I see bandwidth usage per PID, command, and user on a Linux operating systems?
You need to use the nethogs command. It is a small “net top” tool. A tool resembling top for network traffic. From the nethogs project home page:
Instead of breaking the traffic down per protocol or per subnet, like most such tools do, it groups bandwidth by process and does not rely on a special kernel module to be loaded. So if there’s suddenly a lot of network traffic, you can fire up NetHogs and immediately see which PID is causing this, and if it’s some kind of spinning process, kill it.
Linux See Bandwidth Usage Per Process With Nethogs
The nethogs tool only works under Linux operating systems. Let us see how to install and use Nethogs tool on Linux operating systems to see bandwidth usage per process.
Install nethogs on a Debian or Ubuntu Linux
Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libavutil-extra-51 libggiwmh0-target-x libggi2 libgii1 libvo-aacenc0 libgii1-target-x mplayer-skin-blue libggiwmh0 libggi-target-x libvo-amrwbenc0 Use 'apt-get autoremove' to remove them. The following NEW packages will be installed: nethogs 0 upgraded, 1 newly installed, 0 to remove and 4 not upgraded. Need to get 0 B/28.2 kB of archives. After this operation, 115 kB of additional disk space will be used. Selecting previously deselected package nethogs. (Reading database ... 331881 files and directories currently installed.) Unpacking nethogs (from .../nethogs_0.7.0-3_amd64.deb) ... Processing triggers for man-db ... Setting up nethogs (0.7.0-3) ...
Install nethogs on a RHEL or CentOS or Fedora Linux
Loaded plugins: product-id, rhnplugin, security, subscription-manager This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register. This system is receiving updates from RHN Classic or RHN Satellite. rhel-x86_64-server-6 | 1.5 kB 00:00 rhel-x86_64-server-6/primary | 13 MB 00:01 rhel-x86_64-server-6 10127/10127 rhel-x86_64-server-6-debuginfo | 1.3 kB 00:00 rhel-x86_64-server-6-debuginfo/primary | 776 kB 00:00 rhel-x86_64-server-6-debuginfo 4240/4240 rhel-x86_64-server-optional-6 | 1.5 kB 00:00 rhel-x86_64-server-optional-6-debuginfo | 1.3 kB 00:00 rhel-x86_64-server-supplementary-6 | 1.5 kB 00:00 Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package nethogs.x86_64 0:0.8.0-1.el6 will be installed --> Finished Dependency Resolution Dependencies Resolved ===================================================================== Package Arch Version Repository Size ===================================================================== Installing: nethogs x86_64 0.8.0-1.el6 epel 28 k Transaction Summary ===================================================================== Install 1 Package(s) Total download size: 28 k Installed size: 53 k Is this ok [y/N]: y Downloading Packages: nethogs-0.8.0-1.el6.x86_64.rpm | 28 kB 00:00 Running rpm_check_debug Running Transaction Test Transaction Test Succeeded Running Transaction Installing : nethogs-0.8.0-1.el6.x86_64 1/1 Verifying : nethogs-0.8.0-1.el6.x86_64 1/1 Installed: nethogs.x86_64 0:0.8.0-1.el6 Complete!
If you are using Fedora Linux, type:
$ sudo dnf install nethogs
Install nethogs on an Arch Linux
$ sudo pacman -S nethogs
Install nethogs on an OpenSuse Linux
# zypper install nethogs
How do I use the nethogs command?
The syntax is:
nethogs nethogs eth1 nethogs [option] eth0 eth1 nethogs [option] eth0 eth1 ppp0 sudo /usr/sbin/nethogs eth0
Another output from one of my personal RHEL server:
Use the following interactive controls, when nethogs is running:
- m : Cycle between display modes (kb/s, kb, b, mb)
- r : Sort by received.
- s : Sort by sent.
- q : Quit and return to the shell prompt.
-d delay for refresh rate. -h display available commands usage. -p sniff in promiscious mode (not recommended). -t tracemode. -V prints Version info.
A note about error “creating socket failed while establishing local IP – are you root?”
If you get an error that read as follows:
creating socket failed while establishing local IP – are you root?
Make sure you are using the latest version of nethogs and run it as a root user:
$ sudo nethogs eth1
nethogs-qt – Qt-based GUI
Not a fan of the CLI? Try using GUI tool. Here is how to install nethogs-qt on Ubuntu 16.04/18.04 LTS desktop:
$ sudo apt-get install g++ make qt5-default qt5-qmake git libpcap-dev
$ git clone https://github.com/qtproject/qtcharts.git
$ cd qtcharts
$ sudo make install
$ wget http://slist.lilotux.net/linux/nethogs-qt/nethogs-qt-0.0.4.tgz
$ tar zxvf nethogs-qt-0.0.4.tgz
$ cd nethogs-qt-0.0.4
$ sudo ./nethogs-qt
$ sudo ./nethogs-qt
Check out related media
This tutorial is also available in a quick video format:
- Linux display bandwidth usage on network interface by host using iftop.
- man page – nethogs.
- Nethogs project home page.