How do I find out how many nfs clients are connected to NFS server running on Red Hat Enterprise Linux?
You can use the following commands. SSH or login into your nfs server and type the following command:
netstat -an | grep nfs.server.ip:port
If your nfs server IP address 192.168.1.12 and port is 2049, enter:
netstat -an | grep 192.168.1.12:2049
tcp 0 0 192.168.1.12:2049 192.168.1.5:757 ESTABLISHED tcp 0 0 192.168.1.12:2049 192.168.1.6:892 ESTABLISHED
- 192.168.1.12 – NFS serer IP address
- 2049 – NFS server port
- 192.168.1.5 and 192.168.1.6 – NFS clients IP address
You can to use the showmount command to see mount information for an NFS server. The following command should not be used as it may produce unreliable result (you can type this command on any one of the nfs client):
showmount -a nfs03
All mount points on nas03: 192.168.1.101:/volume1/data 192.168.1.102:/volume1/data 192.168.1.103:/volume1/data 192.168.1.5:/volume1/data 192.168.1.6:/volume1/data
- -a : List both the client hostname or IP address and mounted directory in host:dir format. This info should not be considered reliable.
More about /var/lib/nfs/rmtab file
The rmtab file is located at /var/lib/nfs/rmtab on nfs server and can be viewed using the cat command:
From the rpc.mountd(8) man page:
The rpc.mountd daemon registers every successful MNT request by adding an entry to
the /var/lib/nfs/rmtab file. When receivng a UMNT request from an NFS client,
rpc.mountd simply removes the matching entry from /var/lib/nfs/rmtab, as long as
the access control list for that export allows that sender to access the export.
Clients can discover the list of file systems an NFS server is currently exporting,
or the list of other clients that have mounted its exports, by using the show-
mount(8) command. showmount(8) uses other procedures in the NFS MOUNT protocol to
report information about the serverâ€™s exported file systems.
Note, however, that there is little to guarantee that the contents of
/var/lib/nfs/rmtab are accurate. A client may continue accessing an export even
after invoking UMNT. If the client reboots without sending a UMNT request, stale
entries remain for that client in /var/lib/nfs/rmtab.